IKU A12 Emergency call only network fix wifi BT solution Full Scatter.rar

IKU A12 Emergency call only network fix wifi BT solution Full Scatter.rar

============

Firmware Repair and fix:
1- Emergency call only ( Only emergency calls are allowed).
2- Fix WIFI and BT.
3- Fix Water Mark Auto without using tool
4- firmware Tested with NCK MTK & UMT & CM2 & EFT Pro and others tools supported flash.
5- You can use this firmware with all phones same problem.
6- No Need to Write IMEI.

Question: What is the difference between this file and others uploaded?

The difference between this file and others is that it is a complete file Full Scatter,
Can use this firmware via many supporting tools,
Fix the problem of emergency call, Wi-Fi and Bluetooth,
and especially  calles menu watermark remove automatically without tools.

Firmware Contains All Languages specially Arabic Language..

حل مشكلة مكالمة الطواريء فقط
إصلاح واي فاي وبلوتوث
إزالة العلامة المائية التي تظهر أثناء المكالمة تلقائيا بدون أدوات
الفلاشة مجربة على العديد من الأدوات وهي:
NCK MTK & UMT & CM2 & EFT Pro وأدوات أخرى داعمة

أيضا يمكنك استخدام هذه الفلاشة مع كل الأجهزة نفس العطل

لست بحاجة لكتابة ايمي أو سيريال نمبر .

الفلاشة تحتوي على كل اللغات بما فيها اللغة العربية

====================

Process Success

Platform: MTK SmartPhone - MT65/67/68/81/83/87 | Helio G/P/X
Wait...
[+] Update PMT [re-Part]
[-] Checksum Verify
[+] Safe Erase [Upgrade]
[+] Check compatibility
[+] Backup
[-] UserData Safe
[-] FLASH ERASE

Files: 30
[FL]: C:UsersShoriku A12 All Problems wifi restart emergency
[FL]: Set: preloader_g2062fpr_v1_gq_fng_s60dikiku_r.bin
[FL]: Set: logo.bin
[FL]: Set: md1rom.img
[FL]: Set: spmfw.img
[FL]: Set: tinysys-scp.bin
[FL]: Set: sspm.img
[FL]: Set: gz.img
[FL]: Set: lk.bin
[FL]: Set: boot.img
[FL]: Set: dtbo.img
[FL]: Set: tz.img
[FL]: Set: teksunhw.img
[FL]: Set: vbmeta.img
[FL]: Set: vbmeta_system.img
[FL]: Set: vbmeta_vendor.img
[FL]: Set: md1rom.img
[FL]: Set: spmfw.img
[FL]: Set: tinysys-scp.bin
[FL]: Set: sspm.img
[FL]: Set: gz.img
[FL]: Set: lk.bin
[FL]: Set: boot.img
[FL]: Set: dtbo.img
[FL]: Set: tz.img
[FL]: Set: teksunhw.img
[FL]: Set: super.img
[FL]: Set: vbmeta.img
[FL]: Set: vbmeta_system.img
[FL]: Set: vbmeta_vendor.img
[FL]: Set: userdata.img
[FL]: Total size: 0xFEB21488 [ 3.98 GB ]

1. Power Off the device
2. Wait 20 seconds
3. Connect USB cable to device [remember Vol+ | Vol-]
Waiting for device connection...

PTFN: MediaTek USB Port (COM9)
MODE: BOOTROM; PORT: 9
Waiting BOOT ack...
BROM: Skip ACK verify
BROM: Init BROM
BROM: Init passed
CHIP: MT6765 SBID: 0x8A00 HWVR: 0xCA00 SWVR: 0x0000 EVOL: 0x0000 HWC: 0x0766
CODE: Cervino
TYPE: MODERN [RAPHAEL]
MEID: B3301061165522F2C89EAF762D8369FC
BROM: Sec Level: 0x00000000 Mode: PLAIN
BROM: BROM|BL : 0x05|0xFE [BOOTROM]
BROM: SOCID: C2DF9F82977343A8A00629C56A59B977279D6D5209C5CEB0CB891F83327ACD27
AGENT: 0_base: base_v2216 | Manual: Off
[3365c4d2] C:InfinityBoxCM2MT2boot0_basebase_v2216MTK_AllInOne_DA.bin
[969f6219] C:UsersShorDiku A12 All Problems wifi restart emergencypreloader_g2062fpr_v1_gq_fng_s60dikiku_r.bin
Looking for suitable BootChain in DA...
Found MT6765
AGENT: MTK_DOWNLOAD_AGENT
BROM: Sending 1st DA...
BROM: DA sent
BROM: Transfer control to DA...
DA: AGENT started
DA: SYNC
DA: MODE: BROM
DA: EXT_RAM NOT initialized

EMMC:
CID: 90014A68433961503301A187986D270F
VEN: Hynix OEM: 74 ID: 684339615033 [hC9aP3] PRV: 0x01
SNN: 2710018157 [0xA187986D] MF: 2/2020
EMI: MT6765 preloader_g2062fpr_v1_gq_fng_s60dikiku_r.bin with 28 memory type(s) supported
[00] DRAM LP_DDR4X ID: NOT_DEFINED Ven: Unknown 0x0000 | Dev: RAM: [ 512.00 MB ]
[01] eMMC LP_DDR4X ID: 90014A484347386134 Ven: Hynix | Dev: HCG8a4 RAM: [ 4.00 GB ]
[02] eMMC LP_DDR4X ID: 13014E53304A333859 Ven: Micron | Dev: S0J38Y RAM: [ 4.00 GB ]
[03] eMMC LP_DDR4X ID: 13014E53304A394438 Ven: Micron | Dev: S0J9D8 RAM: [ 4.00 GB ]
[04] eMMC LP_DDR4X ID: 13014E53304A394B38 Ven: Micron | Dev: S0J9K8 RAM: [ 4.00 GB ]
[05] eMMC LP_DDR4X ID: 150100444836444142 Ven: Samsung | Dev: DH6DAB RAM: [ 4.00 GB ]
[06] eMMC LP_DDR4X ID: 450100444134303634 Ven: Sandisk | Dev: DA4064 RAM: [ 4.00 GB ]
[07] eMMC LP_DDR4X ID: 90014A68433861503E Ven: Hynix | Dev: hC8aP> RAM: [ 4.00 GB ]
[08] eMMC LP_DDR4X ID: F40122426977696E20 Ven: Biwin | Dev: Biwin RAM: [ 4.00 GB ]
[09] eMMC LP_DDR4X ID: 8F0100555936435330 Ven: Unknown 0x008F | Dev: UY6CS0 RAM: [ 4.00 GB ]
[0A] eMMC LP_DDR4X ID: 150100445036444142 Ven: Samsung | Dev: DP6DAB RAM: [ 4.00 GB ]
[0B] eMMC LP_DDR4X ID: 13014E47314A395238 Ven: Micron | Dev: G1J9R8 RAM: [ 4.00 GB ]
[0C] eMMC LP_DDR4X ID: DF0118534359202020 Ven: Unknown 0x00DF | Dev: SCY RAM: [ 4.00 GB ]
[0D] eMMC LP_DDR4X ID: 450100444136303634 Ven: Sandisk | Dev: DA6064 RAM: [ 4.00 GB ]
[0E] eMMC LP_DDR4X ID: 150100445636444D42 Ven: Samsung | Dev: DV6DMB RAM: [ 4.00 GB ]
[0F] eMMC LP_DDR4X ID: 13014E53304A394B39 Ven: Micron | Dev: S0J9K9 RAM: [ 4.00 GB ]
[10] eMMC LP_DDR4X ID: 450100444134313238 Ven: Sandisk | Dev: DA4128 RAM: [ 4.00 GB ]
[11] eMMC LP_DDR4X ID: 90014A684445615033 Ven: Hynix | Dev: hDEaP3 RAM: [ 4.00 GB ]
[12] eMMC LP_DDR4X ID: 13014E52314A394B39 Ven: Micron | Dev: R1J9K9 RAM: [ 4.00 GB ]
[13] eMMC LP_DDR4X ID: 13014E53304A333944 Ven: Micron | Dev: S0J39D RAM: [ 4.00 GB ]
[14] eMMC LP_DDR4X ID: 150100335636434D42 Ven: Samsung | Dev: 3V6CMB RAM: [ 6.00 GB ]
[15] eMMC LP_DDR4X ID: 450100444134313238 Ven: Sandisk | Dev: DA4128 RAM: [ 6.00 GB ]
[16] DRAM LP_DDR4X ID: NOT_DEFINED Ven: Unknown 0x0000 | Dev: RAM: [ 4.00 GB ]
[17] DRAM LP_DDR4X ID: NOT_DEFINED Ven: Unknown 0x0000 | Dev: RAM: [ 4.00 GB ]
[18] DRAM LP_DDR4X ID: NOT_DEFINED Ven: Unknown 0x0000 | Dev: RAM: [ 4.00 GB ]
[19] DRAM LP_DDR4X ID: NOT_DEFINED Ven: Unknown 0x0000 | Dev: RAM: [ 4.00 GB ]
[1A] DRAM LP_DDR4X ID: NOT_DEFINED Ven: Unknown 0x0000 | Dev: RAM: [ 6.00 GB ]
[1B] DRAM LP_DDR4X ID: NOT_DEFINED Ven: Unknown 0x0000 | Dev: RAM: [ 6.00 GB ]
EMI: Init EMI from PRELOADER
EMI: EXT_RAM CFG Passed

DA: BOOT to 2nd DA...
DA: 2ND stage confirmed
DA: SYNC with DA passed
DA: Receiving HW info

SRAM: 0x0003A000 [ 232.00 KB ]
DRAM: 0x100000000 [ 4.00 GB ]

EMMC:
CID: 90014A68433961503301A187986D270F
VEN: Hynix OEM: 74 ID: 684339615033 [hC9aP3] PRV: 0x01
SNN: 2710018157 [0xA187986D] MF: 2/2020
BOOT1: 0x00400000 [ 4.00 MB ]
BOOT2: 0x00400000 [ 4.00 MB ]
RPMB: 0x01000000 [ 16.00 MB ]
USER: 0xE8F800000 [ 58.24 GB ]

CHIP: MT6765 SBID: 0x8A00 HWVR: 0xCA00 SWVR: 0x0000 EVOL: 0x0000 HWC: 0x0766
CODE: Cervino
TYPE: MODERN [RAPHAEL]
RNID: 0D1606730326448A8FB96033DBE73F3C
MEID: B3301061165522F2C89EAF762D8369FC

DA: USB: HIGH-SPEED
Boot done [1]

[FL]: HW verification passed

Reading...
Ok
Verify device config...
Ok
Loaders Ok

[FL]: Pre-Flash backup
Backup exist: C:InfinityBoxCM2MT2backupMT6765__B3301061165522F2C89EAF762D8369FC
[FL]: Pre-Flash backup passed

[FL]: Pre-Erase
Erase: 0x0000000000000000 0x0000000001688000
Erase: 0x0000000003688000 0x000000000769A000
Erase: 0x000000000C000000 0x0000000000800000
Erase: 0x000000000F800000 0x0000000000200000
Erase: 0x0000000013D00000 0x00000001E0B00000

[FL]: RePartition
[FL]: RePartition Ok

[FL]: Flashing now...

Write: PRELOADER
Update bootloader backup copy...
Update bootloader backup copy Ok
Write: LOGO
Write: MD1IMG_A
Write: SPMFW_A
Write: SCP_A
Write: SSPM_A
Write: GZ_A
Write: LK_A
Write: BOOT_A
Write: DTBO_A
Write: TEE_A
Write: TEKSUNHW_A
Write: VBMETA_A
Write: VBMETA_SYSTEM_A
Write: VBMETA_VENDOR_A
Write: MD1IMG_B
Write: SPMFW_B
Write: SCP_B
Write: SSPM_B
Write: GZ_B
Write: LK_B
Write: BOOT_B
Write: DTBO_B
Write: TEE_B
Write: TEKSUNHW_B
Write: SUPER
Write: VBMETA_B
Write: VBMETA_SYSTEM_B
Write: VBMETA_VENDOR_B
Write: USERDATA

[FL]: RePartition
[FL]: RePartition Ok

[FL]: Flashing finished
Done: 00:03:53
Reconnect Power/Cable now