Action : Boot Info.
Selected 0-By CPU:MT6571_EMMC
Exe version: NCKBox AndroidMTK 1.8.8.7
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM (Android) (COM102)
Boot mode: Preloader
Phone detected...Please wait
Sending DA agent, please wait...
Using Algo 1.
----------------------------------------------------
BaseBand CPU :MT6580
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 1 GB DRAM
----------------------------------------------------
EMMC: (58Gb+8192Mb) SAMSUNG 0x464e58324d42
EMMC FW VERSION: 01:00:00:00:00:00:00:00
EMMC CID: 150100464E5832 : 000000000000000000
EMMC UA SIZE: 0x1d2000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x1d2880000 [7.290 GB]
Preloader SEC version: 2
Status: USB_HIGH_SPEED
-Reading GPT Drive OK
This phone have FRP partition.
Build ID: NRD90M
Display ID: WX3-H8014B-N-EG-170830V110
Version: 7.0
Build Date: Wed Aug 30 01:54:52 CST 2017
Model: TECNO WX3
Brand: TECNO
Device: TECNO-WX3
Mediatek Version Release: WX3-H8014B-N-EG-170830V110
IMEI[1]: 35318XXXXXXXX
IMEI[2]: 35318XXXXXX
Wait untill phone will start charging.
All done.
